There’s something warm and a little ceremonial about a gate that opens on two leaves. It’s that classic, “hospitable” entrance that gives an impression of order and seriousness — the gate that swings wide open when guests arrive and gives a house its character. Swing gates are the oldest and most recognisable type of gate, and that’s exactly why they never go out of fashion.

At Alu kramil we make swing gates from aluminium because the material combines good looks with practicality. A gate leaf hangs on hinges and opens along an arc, so weight matters — a heavy leaf “drops” over time, starts to stick and strains the posts and hinges. Aluminium is light yet strong, so the leaf stays true and opens easily for years, without rust and without painting. It’s part of our wider range of aluminium gates, alongside the sliding and cantilever versions.

Aluminium swing gate at the entrance to a yard – Alu kramil

When a swing gate is the right choice

A swing gate is the right choice when you have enough room for it to open and when you love that classic, open look of the entrance. It opens like yard doors — on one or two leaves — and when it’s swung wide, it gives a clear, generous passage that both a car and people pass through easily. For many, that feeling of “the gate thrown wide open” is something a sliding gate simply can’t convey.

The key question with a swing gate is space. The leaf has to open somewhere — inwards or outwards — so there has to be a clear area for it to move through. If you park right behind the gate or the approach is very narrow, a swing gate may not be ideal, and in that case we’ll steer you honestly towards a sliding gate. The same goes for markedly uneven or steep terrain, where the leaf tends to catch on the ground. But where there’s room and the ground is reasonably level, a swing gate is a warm, classic and reliable choice.

Another advantage is simplicity. A swing gate has fewer moving parts than a sliding one — no guide on the ground, no track to keep clear. That makes it very reliable and easy to maintain, and it’s often more affordable to start with too, particularly in the manual version.

One leaf or two — and the question of automation

A swing gate is made in two basic variants: with one leaf or with two. The two-leaf gate is the classic for wider openings — each leaf is smaller and lighter, so it opens more gracefully and looks symmetrical and tidy. The single-leaf gate makes sense for narrower openings or where you want a simpler solution. Which variant is better depends on the width of the approach and how much space you have to open into, and we work that out together on site.

A swing gate can of course be automated too. An electric motor for swing gates opens the leaves smoothly, and you open them by remote from the car — the same comfort as with a slider. With swing gates the automation works by having motors drive each leaf, along with safety photocells that stop the gate if something gets in the way. This is especially welcome in winter and in the rain, when nobody wants to step outside to open the gate.

If you’re planning automation, it’s good for us to know from the start, because then we prepare the gate and posts for the motor right away. It’s possible to add a motor later too, but it’s always cleaner and more reliable when everything is planned in good time. On site we explain all the options and suggest what makes sense for your approach and budget.

A look that gives the entrance character

A swing gate is the visual “face” of the entrance, so it’s a chance for the whole approach to gain character. Thanks to its classic way of opening, it carries both traditional and modern styles well. Vertical infill gives it that tidy, dignified look; denser or panel infill gives privacy; while combinations with decorative elements or glass can make it something special, in keeping with the style of the house.

We do the colour through powder-coating in any RAL shade, so a swing gate is easy to match with the fence and the façade. Anthracite and black look modern and luxurious, while warmer tones sit nicely with houses in a more natural, traditional spirit. What matters most is that the gate and fence are matched — when the entrance reads as one piece, the whole house gains in value and impression.

We make everything to measure, to the exact width of the opening and the height you want. The leaf has to be precisely made and properly hung to keep opening easily and staying true for years — and this is exactly where you see the difference between a gate made with experience and one thrown together in a hurry.

How we work, and with what warranty

A swing gate looks simple, but it demands accuracy — the leaves have to be properly hung and balanced so they don’t “sag” over time. That’s why we come out to the site free of charge: we measure the opening, look at the space for opening and at the terrain, advise on the number of leaves and on automation, and give a clear quote with no hidden items.

We make the gate to your measurements in the workshop, install it and, if it comes with a motor, commission it, checking that the leaves open smoothly and that the safety features are in place. We explain how to use it. All of that comes with a 20-year factory warranty and experience going back to 2003. We work across Serbia — Belgrade, Novi Sad, Niš, Kragujevac, Subotica, Čačak and other cities.

Swing or sliding — how to decide

The most common dilemma people face is precisely this one: a swing gate or a sliding gate. There’s no universally correct answer, but there is an answer that’s right for your yard, and you reach it easily through a few questions.

The first question is space. If you have a clear area in front of or behind the gate for the leaf to open into, a swing gate is in play; if you park right up against the gate or the approach is very narrow, a sliding gate is almost always the better choice, because it retracts to the side and needs no space to open. The second question is the terrain. On a level approach a swing gate works nicely; on markedly sloping ground the leaf tends to catch, so a sliding or cantilever gate has the advantage there.

The third question is feel and looks. A swing gate gives that classic, “wide-open”, hospitable impression that many people love; a sliding gate looks more modern and technically cleaner. The fourth is budget — a manual swing gate is often more affordable to start with, but as soon as you add automation, the difference narrows.

Our advice is simple: don’t decide based on a picture from the internet, but based on your specific approach. We come out, look at the space, the terrain and the way you move around, and tell you honestly what will work best for you — even when that means recommending the cheaper option.

How much does a swing gate cost

The price of a swing gate depends on the width of the opening, the number of leaves, the type of infill and colour, and on whether it comes with a motor. A manual swing gate is often more affordable than a sliding gate with a motor, but the moment you add automation, the price and the preparation change — which is why we break everything down precisely in the quote.

You get honest advice: whether a swing or sliding gate suits your space better, one leaf or two, and whether a motor makes sense right away. Our goal isn’t to sell you the most, but to have you use the gate happily for years and recommend us onward.

If you love that classic, wide-open entrance and have the room for it, a swing gate is a warm and reliable choice. ☎ Call +381 62 384 667 or send an enquiry, and we’ll arrange a free site visit, so you’ll have a concrete quote with no obligation.

Frequently asked questions

How much space does a swing gate need?
The leaf has to open somewhere — inwards or outwards — so there has to be a clear area for it to move through. If there isn’t enough room, a sliding gate is better; we assess that on site.

One leaf or two — which is better?
Two leaves are the classic for wider openings (each leaf is lighter and opens more gracefully), while one leaf makes sense for narrower approaches. We choose according to the width of the opening.

Can a swing gate have a motor?
It can — we fit an electric motor with a remote and photocells that opens both leaves smoothly.

Is a swing gate good for a slope?
On markedly sloping ground the leaf tends to catch on the ground, so a sliding or cantilever gate is better then. On a gentle slope a swing gate works without a problem — we check on the spot.

Why an aluminium swing gate?
Aluminium is light, so the leaf stays true and opens easily for years, without “dropping”. On top of that it doesn’t rust and needs no painting.

Is it easy to maintain?
Very — there’s no track on the ground to keep clear as there is with a track-mounted slider. The working of the hinges is checked occasionally, and that’s mostly it.

Can I match it to the fence?
Yes, we make it to follow the infill and colour of your fence, so the entrance reads as one piece.

Can a motor be added later?
It can, but it’s best to plan for it in advance so we can prepare the gate and posts from the outset. We’ll advise you on site.

How long do manufacturing and installation take?
Usually two to four weeks from confirmed measurements; versions with a motor may need a little more preparation. You get the exact deadline with the quote.

How do I get a quote?
Call +381 62 384 667 or send an enquiry. The site visit and quote are free and with no obligation, anywhere in Serbia, so you’ll have a concrete figure in front of you very soon.

Swing aluminium gates